What Kind Of Saw Blade Is Used To Cut Vinyl Siding?

What Kind Of Saw Blade Is Used To Cut Vinyl Siding?

What is the best saw blade for cutting vinyl siding?

For this method, you will need a fine tooth plywood circular saw. This type of blade will give you the cleanest cut and provide you with the best results when cutting your vinyl siding.

When cutting vinyl siding with a power saw the saw blade should be?

Install a 32 TPI hacksaw blade into a hacksaw frame. This fine-toothed hacksaw blade will cut through vinyl if you are going to be using a manual saw. Sand any rough edges with 220-grit sandpaper when you are finished.

What do you use to cut vinyl siding?

What you’ll need to cut your vinyl siding:

  1. Circular Saw (vertical cuts )
  2. Tin Snips (vertical cuts )
  3. Utility knife (horizontal cuts )
  4. Safety Goggles.
  5. Carpenter’s Square.
  6. Straightedge.
  7. Measuring Tape.
  8. Vinyl Siding.

What is the easiest way to cut vinyl siding?

Utility Knife

  1. Place a strip of siding face-up on the work table. Place a straightedge lengthwise on the strip to mark where you plan to cut it.
  2. Score along the straightedge with a utility knife. Use medium pressure.
  3. Bend the strip of siding along the cut and snap the vinyl.
You might be interested:  Readers ask: How To Mount Things On Vinyl Siding?

Can you buy vinyl siding by the piece?

Yes. Just make sure they are by the same manufacturer or at least will lock together at the horizontal connections. Best to take an actual sample piece of existing siding to your building supply so they can order the right product.

How do you cut vinyl molding?

Place your molding against the backstop of the saw and clamp or hold it firmly in place. Pull the trigger on the saw handle to engage the blade. Slowly lower the blade through the molding to make your cut.

Why do you need to leave a ¼ expansion joint when installing vinyl siding?

Allow for Expansion and Contraction Vinyl siding installation must allow for material expansion and contraction caused by weather. Cut your siding in lengths with a 1/4 -inch gap for expansion wherever siding butts accessories.


Leave a Reply

Your email address will not be published. Required fields are marked *