What Kind Of Blade Is Needed To Cut Hardie Plank Siding?

What Kind Of Blade Is Needed To Cut Hardie Plank Siding?

What kind of blade Do I need to cut Hardie plank?

Cement Board – Cutting Tools For some types of Hardie board, you’ll need a power tool with a cement board blade with a carbide tip to cut the board. Carbide-tipped blades are made specifically for this kind of work.

What is the best saw blade to cut Hardie?

what is the best saw blade for James hardie siding? For a larger project, use a fiber cement saw blade with polycrystalline diamond tips; if you’re installing Hardie siding on a shed or other small building you can use a fiber cement saw blade with carbide tips.

Can you cut Hardie board with a regular saw blade?

There are a few different power tools that you can use to cut cement backer board. Again, these will produce lots of dust, so protect yourself with goggles and a respirator. For straight cuts, use a circular saw fitted with a carbide-tipped wood- cutting blade, pushing the saw into the material with slow, even pressure.

You might be interested:  Readers ask: How To Restore Color To Faded Vinyl Siding?

What nails should I use for Hardie siding?

NAIL TYPE: Electro-galvanized nails are acceptable for use with James Hardie Siding Products, but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails.

Can you cut Hardie board with a multi tool?

When you ‘re ready to use your multi – tool, attach the ‘Metal Buster’ blade to your multi – tool. On a medium speed, begin to cut the cement board. We recommend tilting the blade when making the first initial cut and gradually level out the blade, as demonstrated in our video below.

What kind of screws do you use for Hardie board?

What type of fastener do you recommend for floor and wall applications of HardieBacker® cement board? In compliance with the tile industry, James Hardie recommends 1-1/4” long galvanized or stainless steel roofing nails (0.121” shank x 3/8” HD) or 1-1/4” long corrosion resistant ribbed waferhead screws (No.

How do you cut Hardie board with a circular saw?

Fit your circular saw with a carbide-tipped wood- cutting blade (view example on Amazon), choosing one with as few teeth as possible in order to minimize the amount of dust given off as you saw. Operate your circular saw as you typically would, pushing it slowly and evenly through your cement backer board.

Can you use a router on Hardie board?

Simple answer. NO!!! Durock is a concrete board, and a standard router bit won’t do anything but dull immediately. Just score it with a knife and crack it just like you would with drywall.

You might be interested:  Quick Answer: How To Stain Log Siding?

Is Hardie board dust dangerous?

Breathing dust that contains respirable crystalline silica can lead to silicosis, a deadly lung disease. Respirable dust is that fraction of the aerosol that is small enough to reach the deeper, gas-exchange regions of the lungs.

Can you screw into Hardie board siding?

Can you screw James Hardie siding? If you mean “ can you put screws into James Hardie siding ” the answer is yes. Otherwise, you may have landed on the wrong website. James Hardie boards can technically be drilled like wood, but it is best to use a masonry bit to drill this tough fiber-cement board.

Is Hardie board fireproof?

Fire Ratings Hardiebacker board is generally noncombustible, and the heat produced from the fireplace will not damage it.

Can I cut cement board with a circular saw?

Cement backer board can be cut with a carbide-tipped scoring tool, just score and snap the sheet, similar to cutting drywall. For straight cuts, use a circular saw fitted with a carbide-tipped woodcutting blade, but here’s a little secret: use a blade with the fewest number of teeth you can find.

Can I cut cement board with a jig saw?

Use a jigsaw to make rounded cuts in the cement board. A jigsaw can cut straight cuts, rounded cuts, and is the best choice if you need to cut a circular piece or an irregular shape out of the cement board.

Can you use a Sawzall to cut cement board?

A: You can cut cement backer board with a circular saw or grinder equipped with an abrasive or diamond blade. A reciprocating saw with an abrasive blade will also do the trick, and so will a backerboard scoring knife, which works like a standard razor knife but with a carbide cutting edge.


Leave a Reply

Your email address will not be published. Required fields are marked *