Readers ask: What Type Of Nails To Use For Vinyl Siding?

Readers ask: What Type Of Nails To Use For Vinyl Siding?

What kind of nails do you use with vinyl siding?

Use aluminum, galvanized steel, or other corrosion-resistant nails, staples, or screws when installing vinyl siding. Aluminum trim pieces require aluminum or stainless steel fasteners. All fasteners must be able to penetrate a minimum of 1 1/4” (32mm) into nailable material, such as wood sheathing and framing (Fig.

How do you nail vinyl siding?

Do not nail any siding parts too tight. Leave 1/32 inch between the nail head and the vinyl. Vinyl siding must be attached “loosely.” Center nails in slots to permit expansion and contraction of the siding. Drive nails straight and level to prevent distortion and buckling of panel.

Do you have to nail vinyl siding?

Vinyl siding tends to expand and contract considerably with temperature changes. For this reason, manufacturers design it to hang loosely on the nails rather than to be tightly nailed like wood siding. If all the siding is tight, it was installed wrong and should be redone.

Can roofing nails be used for siding?

You can use a roofing nailer (1-3/4″ galvanized nails ) to install siding if you “blind nail ” them, so you won’t see the nail head at all. James Hardie’s website has instructions on their website how to install their siding using roofing nails or a roofing nailer. The nails are attached above the exposure line.

You might be interested:  Quick Answer: How To Remove Spray Paint Vinyl Siding?

Can you put a screw in vinyl siding?

So, can you drill into vinyl siding? You can safely drill into any vinyl sidings if you take a few precautions and follow the correct steps. However, you should avoid doing drilling when the weather is cold as the siding can become brittle.

Do i need foam board under vinyl siding?

Many people install vinyl siding or concrete board sding to improve the look and value of their home. With budgets tighter than ever now, contractors and do -it-youselfers are tearing off the original siding and installing a thin foam board underneath claiming it will improve the energy efficiency of the property.

Can I install my own vinyl siding?

The truth is, the price of a vinyl siding installation can be cut nearly in half if you’re willing to do the work yourself. Vinyl siding is sold by most home centers and comes with fairly complete instructions. The tool requirements are also modest. For this reason, vinyl must be cut short and nailed loose.

How many sq feet does a box of vinyl siding cover?

A box of vinyl siding contains two “squares.” A square in construction lingo equals 100 square feet, so a box of vinyl siding will cover 200 square feet.

What is under vinyl siding?

The wood that goes under residential siding — exterior sheathing — performs several functions. It adds insulation, waterproofing and structural support for the framing. It also provides a surface on which to nail the siding. The most common sheathing materials include oriented strand board and plywood.

You might be interested:  FAQ: How To Care For Wood Siding?

How long should vinyl siding nails be?

The nails should measure at least 1-3/4 inches in length, long enough to penetrate into the nailable base at least 3/4 inch.

How much does it cost to vinyl side a house?

When installing vinyl siding, you can choose between insulated and non-insulated. Insulated vinyl siding costs anywhere from $4.00 – $12.00 per square foot installed (compared to non-insulated vinyl at $3.50-$8.00). insulated vinyl siding will generally be more expensive because there is more material in the product.


Leave a Reply

Your email address will not be published. Required fields are marked *