Readers ask: What Nails To Use For Smart Siding?

Readers ask: What Nails To Use For Smart Siding?

What kind of nails do you use for siding?

The best type of nails to use for siding include hot-dip galvanized nails, which boast strength and durability to complete your siding installation successfully.

Do you face nail LP SmartSide?

Siding should be installed with top ( blind ) nailing, with the nails placed a mini- mum of 3/8 in (9.5 mm) from either end. Siding may be face nailed as required.

Can I use a framing nailer for LP SmartSide?

Using a nail gun makes quick work of installing LP SmartSide products. You will want to use a minimum of. 113-inch shank diameter, hot-dipped, galvanized box-style nail with a minimum of. 270-inch head diameter.

Do you use nails or screws for siding?

Use aluminum, galvanized steel, or other corrosion-resistant nails, staples, or screws when installing vinyl siding. Aluminum trim pieces require aluminum or stainless steel fasteners. All fasteners must be able to penetrate a minimum of 1 1/4” (32mm) into nailable material, such as wood sheathing and framing (Fig.

You might be interested:  Question: Where To Buy Nichiha Siding?

How long does LP smart siding last?

Frankly, while the LP SmartSide warranty lasts 20 years beyond Hardie’s, it is prorated, so it loses value every year, and most homeowners are ready for a siding change by that time anyway.

Can you use brad nails for siding?

Nail Gun for Siding A pneumatic nail gun should be used for siding installation, especially for harder fiber cement siding. Choose a nail gun that will accept siding nails. You cannot use a brad gun for installing siding because the brads leave two holes for each brad and do not hold up as well as siding nails.

Can you use finish nails for siding?

The answer is, yes. Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing.

Can I use roofing nails for siding?

You can use a roofing nailer (1-3/4″ galvanized nails ) to install siding if you “blind nail ” them, so you won’t see the nail head at all. Use electro, or hot-dipped galvanized steel or aluminum roofing type nails with a diameter of 1/8″ and a nail head of 3/8″ or larger.

Do you need to prime LP SmartSide?

According to the terms of LP’s application instructions, all exposed edges of LP ® SmartSide ® siding and trim must be primed and painted with approved paint to protect the siding substrate. Therefore, do not prime the back side of the siding or trim.

Can you install LP SmartSide in the rain?

If such conditions exist, the building should be well ventilated to allow it to dry prior to the application of the siding. Siding must not be applied to green or crooked structural framing members. Do not apply siding over rain -soaked or buckled sheathing materials.

You might be interested:  Quick Answer: How To Repair A Hole In Siding From Dog Door?

Can you screw LP SmartSide?

Do not use electroplated fasteners. 38 Series and 76 Series panels must be installed on framing spaced no greater than 16 inch o.c. Do not force siding into place. Maintain the illustrated 1/8 inch space at the joint to allow for expansion while the panel equilibrates with the local environment.

What is the best nail gun for Hardie siding?

Our Recommended Best Nail Gun for Hardie Trim and Siding

  • NuMax SFR2190 Pneumatic 21 Degree Full Round Head Framing Nailer.
  • PORTER-CABLE 20V MAX Cordless Brad Nailer Kit.
  • Dewalt DW66C-1R Coil Nail Gun for Hardie Siding.
  • Freeman P4FRFNCB Hardie Board Nail Gun.
  • BOSTITCH N66C Coil Siding Nailer.

Is Smart Siding any good?

For contractors, business owners and homeowners who want the look of wood without the maintenance or cost, LP SmartSide siding is a good fit. The company builds siding products that have the beauty and warmth of wood, but with added durability.

Can you use a nail gun on hardiplank?

Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun. Use 6d or 8d galvanized or stainless siding nails and install a single nail about 1-in.


Leave a Reply

Your email address will not be published. Required fields are marked *