Readers ask: What Is The Going Rate For Spraying Metal Siding?

Readers ask: What Is The Going Rate For Spraying Metal Siding?

How much does it cost to paint steel siding?

This project’s low cost is around $1,500 for painting 1,500 sq. ft. of unoxidized siding, while the high cost is around $7,500 for cleaning and painting 1,500 sq. ft. Cost to Paint Aluminum Siding per Square Foot.

Area to Be Painted Average Costs
1,000 sq.ft. $1,000 – $5,000
1,500 sq.ft. $1,500 – $7,500


How much does it cost to spray paint siding?

The average cost to paint just the siding is around $2,000 to $4,000 for 1,500 sq. ft., depending on the type of siding and the number of coats of paint it requires. Cost to Paint Siding by Material.

Type Of Siding Average Cost to Paint 1,500 sq.ft. Cost Per Square Foot
Wood $1,500 – $4,500 $1.00 – $3.00
You might be interested:  How To Patch A Hole In Vinyl Siding?


Is it cheaper to paint or replace aluminum siding?

If you decide to paint your home’s old siding yourself, you’ll save on the cost of paying someone else to do it. Even if you decide to pay someone, it’s still cheaper to paint your old siding rather than replace it.

How long does a paint job last on aluminum siding?

Aluminum siding paint typically lasts from five to 10 years and aluminum siding is easy to paint.

How can I tell if my siding is aluminum or steel?

Aluminum has a slightly hollow and metallic sound when struck. Distinguishing between aluminum and steel siding can be more difficult and may require the use of a magnet, which will interact with steel but not aluminum. Rust spots are another sign that the siding is steel.

Should you paint steel siding?

Don’t Paint Metal Siding – It can actually ruin the original baked-on finish. Painting metal siding can have lots of problems. Paint is messy, Paint that is not baked on can crack, chip, bubble, and peel on your siding.

How many gallons of paint do I need for a 2000 square foot house?

How much paint do I need for 2,000 square feet? 5.5 gallons of paint should be sufficient to cover 2,000 square feet, according to our paint calculation formula.

How much should I pay a painter per square foot?

Most professional painters charge $2 to $6 per square foot of paintable area. Less commonly, they’ll charge anywhere from $20 to $50 an hour. In some areas with high costs of living, you might even pay upwards of $100 an hour.

You might be interested:  Often asked: How To Cut Cement Board Siding?

How much does it cost to have aluminum siding painted?

The average cost to paint aluminum siding on a home ranges from $3,125 to $8,300 for a 2,500-square foot home, but most homeowners report spending about $5,730. Cost will vary based on labor, paint prices, and the condition of the metal.

When did they stop using aluminum siding?

Aluminum used to be the most common material for siding from the 1940s through the 1970s, but it has slowly decreased in popularity since then.

How much does it cost to paint a 3000 sq ft house exterior?

Painting an average home between 1,500 and 2,500 square feet can cost between $1,000 and $6,000. Exterior Home Painting Costs Per Square Foot.

Total Paintable Area* Average Total Cost
2,200 $1,100 – $7,700
2,500 $1,250 – $8,750
2,800 $1,400 – $9,800
3,000 $1,500 – $10,500


Is it a good idea to paint over aluminum siding?

Products and tools you’ll need to paint aluminum siding Galvanized metal etching primer is also a good choice. Acrylic exterior paint: Acrylic paint is recommended because it bonds well over vinyl surfaces. Choose a color similar to the current shade of the siding.

Is it a bad idea to paint aluminum siding?

Although Aluminum Siding Is A Low-Maintenance Building Material, That Doesn’t Mean That It’s No-Maintenance. The good news is that, when properly prepared, paint sticks very well to aluminum siding. And painting your home is much cheaper than replacing your siding.

Can you power wash aluminum siding?

Power washing can be too harsh for some aluminum siding, or other types of exterior siding like vinyl, brick or stucco. Unfortunately, too much pressure can do more harm than good. Sometimes it damages the material or pushes the aluminum away from the structure of the house.

Leave a Reply

Your email address will not be published. Required fields are marked *