Readers ask: How To Hang Christmas Lights On Siding?

Readers ask: How To Hang Christmas Lights On Siding?

How do you hang lights on vinyl siding?

All you need are these vinyl siding clips. To attach them to the hooks, I just used an old wire coat hanger to loop through the screw holes in my boxes, twist, and hang them up. The little hooks made it really easy to string our outdoor lights to the corner of our house too.

How do you hang Christmas lights without damaging siding?

Vinyl siding clips can be used to help string up lights across the side of your house without nails or glue. The clips are simply installed under the siding — just slide them in and you’re ready to decorate. After the holidays, lift them right off and your siding will be damage -free.

You might be interested:  Readers ask: Why Does Redwood Siding Bubble?

Will Christmas lights melt vinyl siding?

No, they are not.

How do you hang Christmas lights outside without staples?

Try using plastic clips instead of nails or staples. Plastic clips are the easiest way for hanging Christmas lights on the roof. You can also use a staple gun to hold them in place, but that also will make it more time consuming to remove after Christmas.

How do you get lights to stick to siding?

Clear plastic hooks blend in with the house siding and are the least visible. Hooks made to hang light strings have a flap or catch built in to secure the cord. You can also use hooks that have holes or slots, and attach the light string with a cable tie through the slot on the hook.

Do Command Strips work on vinyl siding?

To what surfaces will Command ™ Products stick? Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard. Command ™ Outdoor Products can also be used on smooth, sealed and finished surfaces including vinyl siding and fences, doors, windows, decks, gutters and trim.

How do you hang lights without drilling holes?

Use Adhesive-Backed Hooks Just like with gutter hooks, adhesive-backed hooks can help you hang outdoor lights without using nails or drilling holes. However, you don’t hang these off the lip of a gutter or other surface. Instead, you either peel the back or apply adhesive to the hook and pin it onto a flat surface.

Can you staple Christmas lights to siding?

Staples Are For Paper, Not Your Home “Any penetration through your roofing materials can lead to damaging leaks.” Not only will staples damage your home, you could also damage the lights. One staple misfire can ruin an entire strand of lights. So, the first rule for safe decorating: Put down the staple gun.

You might be interested:  How Many Square Feet In A Box Of Vinyl Siding?

Do you leave Christmas light clips up?

These clips hold extra tight, so it is important to remove them one at a time when the season is over. Trying to pull them down with a tug of the light string might result in bringing the gutter down too! If you are planning to hang icicle lights as well as other light styles

How do you hang things on vertical vinyl siding?

For an easy way to hang stuff on vinyl siding, make some of these jewels! No screws, tape or command strips. Take a picture hanger, trim the hook and add a zip tie loop. To use, slip the hook under a siding lap and it locks into place.

How do I hang lights on the side of my house?

Use a ladder to drape the lights over the hooks at the top of the posts or attach them to the hooks with twist ties. If needed, use an outdoor extension cord to plug the string lights into a power source.

How do you attach Christmas lights to fascia?

Push a clip onto the fascia board near the edge of the board with the hook for the light strand facing out. Clip the light strand into the hook. If you are using clothespins, hold the end of the light strand against the fascia board edge and clip it in place with the clothespin.

How do you hang lights on a wall without nails?

Stick a small adhesive decorating clip to the walls in each place you want to attach a strand of lights. To secure a vertical stretch of lights going straight up or down the wall, face the clips in alternating directions to make the arrangement more secure.

You might be interested:  FAQ: How To Maintain Cedar Siding?

How do you hang outdoor lights on a deck?


  1. Determine how many poles you will need. We used two – one on each of the farthest corners of the deck.
  2. Paint or stain the wood poles to match the deck. Allow to dry.
  3. Attach poles to the deck. Using wood screws, attach each pole to the back of the deck.
  4. Add hooks.
  5. Attach string lights.

How do you hang outdoor strand lights?

How to Hang Outdoor String Lights

  1. Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces.
  2. Step 2: Mount Screw Hooks.
  3. Step 3: Connect & Tighten Cable.
  4. Step 4: Attach Your String Lights.
  5. Step 5: Sit Back and Enjoy!

Leave a Reply

Your email address will not be published. Required fields are marked *