Readers ask: How To Get Dark Stain Off Cedar Siding?

Readers ask: How To Get Dark Stain Off Cedar Siding?

Can you remove stain from cedar siding?

“Yup. You need a garden pump sprayer and a scrub brush. You let the oxy bleach solution set on the wood for about 15 minutes and then scrub it off.” Now the cleaned and brightened cedar wood siding is ready to stain.

How do you remove dark stains from wood siding?

For slightly darker stains, you may be able to lightly bleach them away. Make a solution that is half bleach and half water, and lightly apply it to the water stains — but do not saturate or soak the area. Once the bleach is dry, if the stain hasn’t fully disappeared, consider making the solution 75% bleach.

How do you lighten dark cedar siding?

One part white vinegar to 3 or 4 parts water is fine. Dip a sponge in the vinegar solution, and wipe it on the bleached wood. Rinse the sponge in clear water before dipping it again in the neutralizing solution. Once the cedar is dry, you can leave it as is or apply the finish of your choice.

You might be interested:  Readers ask: Who Insures Homes With Asbestos Siding?

How do you clean cedar siding with OxiClean?

Mix the powdered Oxiclean as four parts water to one part powdered product and apply the solution with a garden sprayer. All the OxiClean to soak into the wood for around fifteen minutes. Once the time is up, you can use a soft-bristled scrub brush to remove the debris, followed by a rinse-off with the garden hose.

How do you get stains out of cedar?

  1. STEP 1: Prepare your work area.
  2. STEP 2: Organize the tools and materials.
  3. STEP 3: Pour the stripper in a smaller container.
  4. STEP 4: Apply a thick layer of stripper.
  5. STEP 5: Let it soak.
  6. STEP 6: Scrape the stain stripper off the wood.
  7. STEP 7: Wipe down the surface.
  8. STEP 8: Sand your surface.

How do I make cedar siding look new again?

After cleaning your cedar to bring back its color, apply a clear exterior varnish to help sustain it. A quality weatherproofing product will prolong the fresh look of your cedar and help limit algae growth. If you would prefer your siding stained another color, choose a stain that is darker than the cedar.

Why is my cedar siding turning black?

As cedar ages, the wood slowly changes color. Tannins ordinarily leach from cedar wood, and do not normally cause any problems. However, when tannins mix with metal and iron, a chemical reaction occurs and a black stain can form. Cedar, along with any other wood, is a natural habitat for mildew and mold.

What can I use to strip stain off wood?

Pour the stain remover into a glass or metal container and apply according to manufacturer’s instructions. Traditional chemical strippers and citrus strippers are both effective. Use a paint brush with natural fibers to apply a thick, even layer of the stripper to the surface.

You might be interested:  Often asked: How To Remove Rust From Steel Siding?

Can you use bleach on cedar siding?

A safe deep-cleaner for wood siding is oxygen bleach. It is a powder that mixes with water. It is non-toxic to vegetation and trees and will not remove any natural color from the siding. You simply keep the wood siding wet with the oxygen bleach solution for 15 minutes.

What is the best stain for cedar siding?

Our Top 5 Best Stains For Cedar Wood

  • Ready Seal Natural Cedar Exterior Stain.
  • Thompson’s WaterSeal Waterproofing Stain.
  • Defy Extreme Transparent Exterior Wood Stain.
  • Olympic Stain Elite Woodland Oil Stain.
  • Cabot Semi-Solid Deck & Siding Stain.

Can you lighten cedar?

The best woods for bleaching include oak, beach, ash, and gum. Varieties like poplar and pine are already so light that removing further natural wood color might render them bland and lifeless. Others, like cedar, redwood, rosewood, and cherry don’t take bleach well.

Is Power Washing bad for cedar siding?

Power washing can be used to clean cedar as long as the sprayer is set at a low pressure to prevent damaging the wood’s soft surface. Once cleaned and allowed to dry, the wood can then be painted using a urethane-acrylic house paint. It is unsightly, but the cedar has not been damaged.

How do you prepare old cedar siding for staining?

Before staining, replace rotting or decayed wood and remove loose stain and eroded wood fibers by sanding, scraping or power washing the problem surfaces.

How do you clean weathered cedar?

The Cedar Bureau recommends using a solution no stronger than one-part bleach to three parts water. Apply it with a pump sprayer and let it sit for about 15 minutes before rinsing it off with a garden hose. Be sure to keep the hose pointed downward to avoid forcing water up behind the shingles.


Leave a Reply

Your email address will not be published. Required fields are marked *