Readers ask: How Much Overlap On Fiber Cement Siding?

Readers ask: How Much Overlap On Fiber Cement Siding?

How far do you overlap Hardie siding?

According to the James Hardie website, the actual overlap should be 1 1/4″ for your Hardieboard siding, so you actually were close in your estimate.

How much do you lap Hardie plank siding?

Hardiplank lap siding can be installed over braced wood or steel studs spaced a maximum of 24” o.c. or directly to minimum 7/16” thick OSB sheathing. Hardiplank lap siding can also be installed over foam insulation up to 1” thick.

Is fiber cement siding too heavy?

Cement Siding: A Heavy Hitter One of the advantages of fiber cement siding is its strength and durability. Cement siding panels are heavy and unwieldy when compared to steel, vinyl and aluminum siding.

Can you install Hardie plank directly to studs?

HardiePlank ® lap siding can be installed over braced wood or steel studs spaced a maximum of 24″ o.c. or directly to minimum 7/16″ thick OSB sheathing. See General Fastening Requirements.

What is the best nail gun for Hardie siding?

Our Recommended Best Nail Gun for Hardie Trim and Siding

  • NuMax SFR2190 Pneumatic 21 Degree Full Round Head Framing Nailer.
  • PORTER-CABLE 20V MAX Cordless Brad Nailer Kit.
  • Dewalt DW66C-1R Coil Nail Gun for Hardie Siding.
  • Freeman P4FRFNCB Hardie Board Nail Gun.
  • BOSTITCH N66C Coil Siding Nailer.
You might be interested:  Readers ask: How Much To Charge To Install Hardie Siding?

Can I use screws for Hardie siding?

HardiePlank® lap siding may be used with fasteners approved by ICC-ES ESR-2290 spaced in accordance with the Wind Load Tables. Fasteners must be corrosion resistant, galvanized or stainless steel.

Can I use a finish nailer on Hardie siding?

You can hand nail the trim with stainless steel siding nails. No problem nailing thru the Hardie Board. If the nails won’t show then a roofing nailer will work too.

Do you need plywood under Hardie board siding?

Fiber cement siding should be installed over plywood, OSB, or sheathing. Be sure that the siding installed is dry. Otherwise, it might shrink at butt joints.

How much does a 12 ft Hardie plank weigh?

A. Absolutely not. Hardieplank weighs 2.3 lbs per square foot. That is about the same weight as 5/8″ thick Sheetrock.

How long does fiber cement siding last?

With regular TLC, your fiber cement siding can last 50 years or more—now that’s what I call long -lasting!

Is James Hardie siding better than vinyl?

By contrast, James Hardie fiber cement siding is more durable and up to 5x thicker than vinyl siding. It easily stands up to the elements, resisting damage from wind, rain, freezing temperatures and hail, and gives homes years of protection with low maintenance.

Do you need a starter strip for Hardie siding?

HardiePlank® lap siding requires a starter strip beneath the first course to set it on the proper angle and to create a proper drip edge at the bottom of the siding. Starter strips are easily made by ripping 11/4-in.


Leave a Reply

Your email address will not be published. Required fields are marked *