Quick Answer: How Wide Is Hardie Plank Siding?

Quick Answer: How Wide Is Hardie Plank Siding?

How wide is Hardie board?

HardieTrim® Batten Boards are 19mm (¾ in) thick, 64mm (2½ in) wide, and come on 3,658mm (12 ft) lengths. See your local dealer for details and availability of product colors and accessories. A Complete James Hardie Exterior – Close-up on trim products.

What size is Hardie plank?

HardiePanel vertical siding is 5/16 in. thick and is available in 4×8, 4×9 and 4×10 sizes. Please see your local James Hardie dealer for texture and size availability.

How much should Hardie plank siding overlap?

Fiber cement siding should be installed 6” or more above the grade level of the house with a 1”– 2” gap between horizontal surfaces like decks, steps, or adjacent roofs. Flash above doors and windows, leaving a ¼” gap between the flashing and siding.

How thick is Hardie horizontal siding?

HardieTrim® Batten Boards are ¾ in. thick, 2½ in. wide, and come on 12 ft. lengths.

Is Hardie board expensive?

The Cost. Hardie board siding runs about $0.70 to $5.25 per square foot. This could lead to a total cost of anywhere from $4,700 to $13,300.

You might be interested:  What Color Siding?

How much does it cost to side a 1500 sq ft house?

Aluminum siding costs An average 1,500 square foot house would cost around $7,700 for standard aluminum siding and upwards of $11,000 for custom grades after labor and material costs.

Is James Hardie siding?

A 100% HARDIE exterior features America’s #1 brand of siding and the only trim with the character to stand beside it. There’s no substitute for authentic James Hardie siding and trim. Select from our full collection of products to design your home’s exterior.

Is James Hardie siding worth it?

James Hardie siding is a great, environmentally friendly choice for overall curb appeal and home value. It will give your home a new look and feel to it. It is an attractive choice with guaranteed durability and quality. It provides an amazing return on investment.

Does Hardie board need to be painted?

What is Hardie Plank? Hardie Plank is a newer composite material made of concrete substrate. Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance.

Can you install Hardie plank directly to studs?

HardiePlank ® lap siding can be installed over braced wood or steel studs spaced a maximum of 24″ o.c. or directly to minimum 7/16″ thick OSB sheathing. See General Fastening Requirements.

Can I use screws for Hardie siding?

HardiePlank® lap siding may be used with fasteners approved by ICC-ES ESR-2290 spaced in accordance with the Wind Load Tables. Fasteners must be corrosion resistant, galvanized or stainless steel.

You might be interested:  Readers ask: What Kind Of Wood Is Used For House Siding?

Do you need plywood under Hardie board siding?

Fiber cement siding should be installed over plywood, OSB, or sheathing. Be sure that the siding installed is dry. Otherwise, it might shrink at butt joints.

Is Hardie lap siding reversible?

Allura is not the only product giving James Hardie some competition. Boral’s TruExterior siding and trim products, made primarily from recycled polymers and fly ash, feature reversible smooth and wood grain-textured sides and can be cut and installed with standard woodworking tools.

How long does Hardie board last?

With the proper care, your James Hardie fiber cement siding will outlast its 30-year warranty. It can even last up to 50 years if cared for properly.

Is Hardie board fireproof?

Fire Ratings Hardiebacker board is generally noncombustible, and the heat produced from the fireplace will not damage it.


Leave a Reply

Your email address will not be published. Required fields are marked *