Quick Answer: How To Stain Log Siding?

Quick Answer: How To Stain Log Siding?

What is the best stain for log siding?

Review: Outlast Q8 Log Oil really stands out as an oil-based stain that is also EPA registered wood preservative. Outlast Q8 protects against rot, insects, mold, and water damage. This is a highly effective water repellent stain and great for log siding as well. It also mixes great with products such as NBS30.

How do you prepare log siding for staining?

Before you apply stain, make sure the surface is clean (no dust, dirt, wood fibers or grease), dry and free from mildew. Old Wood

  1. Use a medium grit paper at first.
  2. Finish the job with a fine grit paper to ensure the smoothest texture.
  3. Be sure to use a protective dust mask.

Can you stain over stain on log home?

If staining over stain, make sure that the new stain is compatible. Often if you switch from oil to water based stain you will have to use a cob blaster to get down to the bare wood.

You might be interested:  Often asked: How To Measure House For Siding?

What are the problems with log homes?

The most common log home problems are:

  • Moisture problems in log homes. Rain, snow, humidity, and damp places all cause moisture damage.
  • Insects and critter problems in log homes. Insects and critters tend to love our log homes just as much as we do.
  • UV Ray damage in log homes.

Should I paint or stain my log home?

The answer is no, it won’t. Paint doesn’t protect logs like it does other things. In fact, it will cause your logs to rot. So don’t do it.

Should I pressure wash before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

Can you stain over stain on wood siding?

You can use solid stain over existing solid or semi-transparent stain, but semi-transparent stain over solid stain will look strange and won’t last.

Do you have to stain a log home?

The rustic charm of a log cabin can last for decades if it is cared for properly. However, if maintenance is not kept up with a log home, it will deteriorate in a matter of just a few years. As a general rule, you will need to stain your log home every 3 to 7 years, depending on the elements.

How often should a log home be stained?

How often do I need to re- stain my log home? You should re- stain or touch up your log home about every three years. No stain material is going to last ten years without some type of maintenance.

You might be interested:  Question: Where To Caulk Vinyl Siding?

How much does it cost to stain a log house?

The average labor cost to stain a deck is $1 to $3 per square foot, not including the price of materials. Average Labor Cost To Stain a Deck. How much does it cost to stain a log cabin?

National Average Cost $729
Minimum Cost $300
Maximum Cost $2,300
Average Range $448 to $1,010

Can you pressure wash log siding?

Pressure washing can be perfectly safe for your log home so long as you use the right technique. Always keep the wand moving, especially at higher psi settings, and use a wide fan setting. Holding the stream in the same place for too long or standing too close could damage the wood.

Can you spray stain on a log cabin?

Spraying the stain using a portable sprayer is a very efficient way to do this but be sure you follow up with back-brushing. Alternatively you can brush on the stain by hand and smooth it as you go. This is best if there is only one person doing the staining.

Leave a Reply

Your email address will not be published. Required fields are marked *