Quick Answer: How To Cut Vinyl Siding Video?

Quick Answer: How To Cut Vinyl Siding Video?

What is the best tool to use to cut vinyl siding?

A utility knife is typically the best tool for cutting vinyl siding when you’re making longitudinal cuts along the length of a plank. If you’re only making a few vertical cuts, it’s best to use tin snips or a hand saw.

What is the easiest way to cut vinyl siding?

If you need to cut a lot of vinyl strips and you’re making short, vertical cuts, the quickest and cleanest way to work is with a circular saw. If you’re only cutting a few strips of vinyl and making vertical cuts, using a pair of tin snips is simplest.

How do you cut vinyl siding by hand?

Hold the siding steady with one hand and use your other hand to make long cuts along the mark with your tin snips. Make sure you only close your tin snips about 2/3 of the way. This will help you make cleaner, straighter cuts. Snip through the siding until the end, then repeat with your other pieces.

What blade do you use to cut vinyl siding?

A fine-tooth plywood saw blade will give you the best results when cutting vinyl siding with a circular saw. Avoid using other kinds of saw blades or you may not get a clean cut. You can find a fine-tooth plywood saw blade online or at your local home improvement store.

You might be interested:  Question: How To Clean Aluminum Siding Without A Pressure Washer?

What tools are needed to install vinyl siding?

Basic Installation Tools and Equipment

  • Power Saw. A bench or radial-arm power saw can speed the cutting of the siding or soffit.
  • Utility Knife. Vinyl is easy to cut, trim, and score with a utility knife or scoring tool (Fig.
  • Tin Snips.

How many teeth do I need to cut vinyl siding?

A 36 TPI rating, which means 36 teeth per inch, will be adequate for the job. A jigsaw will allow you to cut corners and right angles when fitting the siding around doors, windows and other protrusions along the house. Cutting with a jigsaw may leave rough edges, but they can be smoothed out with 220-grit sandpaper.

Can you buy vinyl siding by the piece?

Yes. Just make sure they are by the same manufacturer or at least will lock together at the horizontal connections. Best to take an actual sample piece of existing siding to your building supply so they can order the right product.


Leave a Reply

Your email address will not be published. Required fields are marked *