The R package **mkin** provides calculation routines for the analysis of
chemical degradation data, including **m**ulticompartment **kin**etics as
needed for modelling the formation and decline of transformation products, or
if several degradation compartments are involved.

You can install the latest released version from CRAN from within R:

```
install.packages("mkin")
```

In the regulatory evaluation of chemical substances like plant protection products (pesticides), biocides and other chemicals, degradation data play an important role. For the evaluation of pesticide degradation experiments, detailed guidance and helpful tools have been developed as detailed in 'Credits and historical remarks' below.

For a start, have a look at the code examples provided for
`plot.mkinfit`

and
`plot.mmkin`

, and
at the package vignettes
`FOCUS L`

and
`FOCUS D`

.

The HTML documentation of the latest version released to CRAN is available at jrwb.de and github. Documentation of the development version is found in the 'dev' subdirectory.

- Highly flexible model specification using
`mkinmod`

, including equilibrium reactions and using the single first-order reversible binding (SFORB) model, which will automatically create two latent state variables for the observed variable. - Model solution (forward modelling) in the function
`mkinpredict`

is performed either using the analytical solution for the case of parent only degradation, an eigenvalue based solution if only simple first-order (SFO) or SFORB kinetics are used in the model, or using a numeric solver from the`deSolve`

package (default is`lsoda`

). - The usual one-sided t-test for significant difference from zero is nevertheless shown based on estimators for the untransformed parameters.
- Summary and plotting functions. The
`summary`

of an`mkinfit`

object is in fact a full report that should give enough information to be able to approximately reproduce the fit with other tools. - The chi-squared error level as defined in the FOCUS kinetics guidance (see below) is calculated for each observed variable.
- The 'variance by variable' error model which is often fitted using
Iteratively Reweighted Least Squares (IRLS) should now be specified as
`error_model = "obs"`

.

- Three different error models can be selected using the argument
`error_model`

to the`mkinfit`

function. A two-component error model similar to the one proposed by Rocke and Lorenzato can be selected using the argument`error_model = "tc"`

. - Model comparisons using the Akaike Information Criterion (AIC) are supported which can also be used for non-constant variance. In such cases the FOCUS chi-squared error level is not meaningful.
- By default, kinetic rate constants and kinetic formation fractions are
transformed internally using
`transform_odeparms`

so their estimators can more reasonably be expected to follow a normal distribution. - When parameter estimates are backtransformed to match the model definition, confidence intervals calculated from standard errors are also backtransformed to the correct scale, and will not include meaningless values like negative rate constants or formation fractions adding up to more than 1, which cannot occur in a single experiment with a single defined radiolabel position.
- When a metabolite decline phase is not described well by SFO kinetics, SFORB kinetics can be used for the metabolite. Mathematically, the SFORB model is equivalent to the DFOP model used by other tools for biphasic metabolite curves. However, the SFORB model has the advantage that there is a mechanistic interpretation of the model parameters.
- Nonlinear mixed-effects models can be created from fits of the same degradation model to different datasets for the same compound by using the nlme.mmkin method. Note that the convergence of the nlme fits depends on the quality of the data. Convergence is better for simple models and data for many groups (e.g. soils).

- Parallel fitting of several models to several datasets is supported, see for
example
`plot.mmkin`

. - If a C compiler is installed, the kinetic models are compiled from automatically
generated C code, see
vignette
`compiled_models`

. The autogeneration of C code was inspired by the`ccSolve`

package. Thanks to Karline Soetaert for her work on that. - Even if no compiler is installed, many degradation models still give very good performance, as current versions of mkin also have analytical solutions for some models with one metabolite, and if SFO or SFORB are used for the parent compound, Eigenvalue based solutions of the degradation model are available.

There is a graphical user interface that may be useful. Please refer to its documentation page for installation instructions and a manual.

There is a list of changes for the latest CRAN release and one for each github branch, e.g. the main branch.

`mkin`

would not be possible without the underlying software stack consisting of,
among others, R and the package deSolve.
In previous version, `mkin`

was also using the functionality of the
FME package. Please refer to the
package page on CRAN for the full list
of imported and suggested R packages. Also, Debian Linux,
the vim editor and the Nvim-R plugin have
been invaluable in its development.

`mkin`

could not have been written without me being introduced to regulatory fate
modelling of pesticides by Adrian Gurney during my time at Harlan Laboratories
Ltd (formerly RCC Ltd). `mkin`

greatly profits from and largely follows
the work done by the
FOCUS Degradation Kinetics Workgroup,
as detailed in their guidance document from 2006, slightly updated in 2011 and
in 2014.

Also, it was inspired by the first version of KinGUI developed by BayerCropScience, which is based on the MatLab runtime environment.

The companion package kinfit (now deprecated) was started in 2008 and first published on CRAN on 01 May 2010.

The first `mkin`

code was
published on 11 May 2010 and the
first CRAN version
on 18 May 2010.

In 2011, Bayer Crop Science started to distribute an R based successor to KinGUI named
KinGUII whose R code is based on `mkin`

, but which added, among other
refinements, a closed source graphical user interface (GUI), iteratively
reweighted least squares (IRLS) optimisation of the variance for each of the
observed variables, and Markov Chain Monte Carlo (MCMC) simulation
functionality, similar to what is available e.g. in the `FME`

package.

Somewhat in parallel, Syngenta has sponsored the development of an `mkin`

and
KinGUII based GUI application called CAKE, which also adds IRLS and MCMC, is
more limited in the model formulation, but puts more weight on usability.
CAKE is available for download from the CAKE
website, where you can also
find a zip archive of the R scripts derived from `mkin`

, published under the GPL
license.

Finally, there is KineticEval, which contains a further development of the scripts used for KinGUII, so the different tools will hopefully be able to learn from each other in the future as well.

Thanks to René Lehmann, formerly working at the Umweltbundesamt, for the nice cooperation cooperation on parameter transformations, especially the isometric log-ratio transformation that is now used for formation fractions in case there are more than two transformation targets.

Many inspirations for improvements of mkin resulted from doing kinetic evaluations of degradation data for my clients while working at Harlan Laboratories and at Eurofins Regulatory AG, and now as an independent consultant.

Funding was received from the Umweltbundesamt in the course of the projects

- Project Number 27452 (Testing and validation of modelling software as an alternative to ModelMaker 4.0, 2014-2015)
- Project Number 56703 (Optimization of gmkin for routine use in the Umweltbundesamt, 2015)
- Project Number 92570 (Update of Project Number 27452, 2017-2018)
- Project Number 112407 (Testing the feasibility of using an error model according to Rocke and Lorenzato for more realistic parameter estimates in the kinetic evaluation of degradation data, 2018-2019)
- Project Number 120667 (Development of objective criteria for the evaluation of the visual fit in the kinetic evaluation of degradation data, 2019-2020)
- Project Number 146839 (Checking the feasibility of using mixed-effects models for the derivation of kinetic modelling parameters from degradation studies, 2020-2021)

Contributions are welcome!

**Any scripts or data that you put into this service are public.**

Embedding an R snippet on your website

Add the following code to your website.

For more information on customizing the embed code, read Embedding Snippets.