Question: What Nails To Use For Hardiplank Siding?

Question: What Nails To Use For Hardiplank Siding?

What nails do you use for cement board siding?

Fastening Siding Fiber cement siding can be nailed by hand or with a pneumatic nailer. It can also be attached using corrosion resistant screws. Use hot-dipped galvanized or stainless steel nails. Nails should penetrate through the sheathing and at least 1” into studs.

Can you put a nail in Hardie board?

What type of fastener do you recommend for floor and wall applications of HardieBacker® cement board? In compliance with the tile industry, James Hardie recommends 1-1/4” long galvanized or stainless steel roofing nails (0.121” shank x 3/8” HD) or 1-1/4” long corrosion resistant ribbed waferhead screws (No.

How do you hang things on hardiplank siding?

Generally speaking, items can be attached to James Hardie siding by using either corrosion resistant nails or screws. The fasteners must be long enough to go through the siding and into wood or metal substrate (e.g. sheathing or studs).

You might be interested:  Readers ask: How To Restore Color To Faded Vinyl Siding?

Does Hardie need to be nailed to studs?

James Hardie recommends the use of quality, hot-dipped galvanized nails. James Hardie is not responsible for the corrosion resistance of fasteners. Stainless steel fasteners are recommended when installing James Hardie ® products near the ocean, large bodies of water, or in very humid climates.

Can I use a framing nailer for Hardie siding?

The answer is, yes. Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing. You may also find that siding nailers are a few pounds lighter than framing guns.

What length nails do you use for Hardie siding?

Pick out stainless steel or hot-dipped galvanized nails size 6d, 1 1/2-inch-long siding nails and 2-inch long siding nails in the quantity you need for your project.

How long can Hardie board go unpainted?

Pre-primed products can sit for 6 months without paint. Unprimed hardie can sit for 3 months without paint.

Does Hardie board need plywood backing?

Fiber cement siding should be installed over plywood, OSB, or sheathing. Be sure that the siding installed is dry. Otherwise, it might shrink at butt joints.

Do you caulk Hardie board siding?

Wherever Hardie siding meets a trim board, the company recommends you leave a 1/8” gap between the siding and the trim and apply a 3/8” bead of approved caulking to protect and seal the edge of the siding. This means that Hardie contractors are used to overapplying their caulking and letting it shrink over time.

You might be interested:  Question: How To Remove Dry Erase Marker From Vinyl Siding?

Do Command hooks work on Hardie board?

To what surfaces will Command ™ Products stick? Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard. The Outdoor Product line is not recommended for use on rough surfaces, such as cement board, brick or rough-sawn wood.

Do vinyl siding hooks work on Hardie board?

If you must affix something to your siding, consider using a hook made for vinyl siding or a suction cup style hook. Just clean the area where you want the suction hook to attach since dirt will interfere with the suction. If you have James Hardie fiber cement siding, use a wire hook from your soffit trim.

Do you need to pre drill Hardie board?

You must pre – drill holes in the material before attaching the screws.

Can I install Hardie siding myself?

Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.


Leave a Reply

Your email address will not be published. Required fields are marked *