Question: How To Install Cedar Shakes Siding?

Question: How To Install Cedar Shakes Siding?

What do you put under cedar siding?

A vapor barrier is also recommended with cedar siding. The Dupont Tyvek DrainWrap is a quality barrier with built-in channels to channel away excess water. Regardless of new or remodeling installation, Dupont Tyvek DrainWrap weather-resistant barrier is recommended before installation of the cedar siding.

Do cedar shake siding need to be sealed?

While cedar stands up to the elements fairly well on its own, putting a seal or a coat of paint on it can enhance the color and protect the wood from inclement weather. Left unstained, cedar’s red hue will fade to gray within about a year.

How long does cedar shake siding last?

Cedar shake roofing’s durability allows it an average lifespan of about 30 years. With adequate maintenance, the lifespan can increase to 50 years. Its longevity exceeds other roofing materials like asphalt shingles.

Is cedar shake siding expensive?

Cedar shake siding costs between $6 and $12 per square foot for materials and installation. Shingle siding costs $6 to $10 per square foot. For an average-sized house, expect to pay an additional $1,000 to $3,000 for the removal of the existing siding — or about 5% of the total project cost.

You might be interested:  Readers ask: How To Restore Color To Faded Vinyl Siding?

Can you blind nail cedar lap siding?

Blind nailing is an extremely weak way to attach siding that is why they say don’t do it. So don’t do it or you will be redoing it in 2-3 years.

Can cedar be left untreated?

If you leave cedar wood untreated, it will not succumb to the devastating effects of mold, rot and insect damage. However, it will lose its typically golden-brown color. However, even with the proper maintenance, cedar will eventually succumb to fading—usually after about 10 years—and lose its natural tone for good.

Can you use a nail gun on cedar siding?

The answer is, yes. Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing.

How do you keep cedar shakes looking new?

If you have weathered and discolored wood siding, you can regain the new look of cedar by cleaning off the dirt and mildew with a solution of one third cup liquid household detergent (be sure it is ammonia-free), one quart liquid household bleach (containing 5% sodium hypochlorite), and three quarts warm water.

How do you weatherproof cedar shakes?

If you like the natural cedar siding look, you can apply a clear coat solution to them. This clear coat solution will help prolong the life of the wood and will slow down the weathering process to help preserve the natural unfinished look of cedar.

How do you weatherproof cedar?

Waterproofing material is most effective when applied to newly milled cedar.

  1. Clean any dirt accumulated on the wood.
  2. Procure a wood waterproofing material.
  3. Apply the waterproofing with a brush or roller, as per manufacturer’s instructions.
  4. Recoat with multiple coats.
You might be interested:  Question: How To Protect Siding From Dirt?

What is cedar shake siding?

Cedar Siding Style Cedar siding —also called cedar shakes or cedar shingles by some—comes in a variety of stains and textures, including cedar shake. In its natural, unfinished and unstained state, this cedar shake look offers a textured, grainy wood with subtle aroma.


Leave a Reply

Your email address will not be published. Required fields are marked *