Often asked: Where To Buy Hardie Board Siding?

Often asked: Where To Buy Hardie Board Siding?

How much does a sheet of Hardie board cost?

The Cost. Hardie board siding runs about $0.70 to $5.25 per square foot. This could lead to a total cost of anywhere from $4,700 to $13,300.

Can I install Hardie siding myself?

Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.

Does Home Depot sell Hardie board?

James Hardie HardiePlank HZ5 5/16 in. x 8.25 in. x 144 in. Fiber Cement Primed Cedarmill Lap Siding -615572 – The Home Depot.

Which is better Hardie board or smart siding?

One of the biggest reasons many builders and homeowners choose LP over Hardie Plank siding is the significant cost difference. Across the US, Smartside is about 25-35% cheaper than Hardie. This difference amounts to thousands of dollars! LP is cheaper because both the materials and labor cost less than James Hardie.

You might be interested:  Readers ask: What Is Clapboard Wood Siding?

How much does it cost to side a 1500 sq ft house?

Aluminum siding costs An average 1,500 square foot house would cost around $7,700 for standard aluminum siding and upwards of $11,000 for custom grades after labor and material costs.

Is Hardie board siding worth it?

Hardie Board siding is a super durable siding product that looks amazing, is long-lasting, and comes with a fabulous warranty. It’s made of cement, sand, and cellulose fibers which combine to create an outstanding material to both protect and beautify homes.

Can you install Hardie siding directly to studs?

HardiePlank® lap siding can be installed over braced wood or steel studs spaced a maximum of 24″ o.c. or directly to minimum 7/16″ thick OSB sheathing. See General Fastening Requirements.

Can you screw into Hardie board siding?

Can you screw James Hardie siding? If you mean “ can you put screws into James Hardie siding ” the answer is yes. Otherwise, you may have landed on the wrong website. James Hardie boards can technically be drilled like wood, but it is best to use a masonry bit to drill this tough fiber-cement board.

Do you nail or screw Hardie board?

Fasten HardieBacker sheets with proper nails or screws (as listed in ”Materials Required” in the backer installation instructions) every 8” around the perimeter and all supporting studs. Keep fasteners between 3/8” and 3/4” from sheet edges and 2” in from sheet corners.

Does Lowes sell Hardie board?

James Hardie Backer Board at Lowes.com.

Does Hardie board need to be painted?

What is Hardie Plank? Hardie Plank is a newer composite material made of concrete substrate. Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance.

You might be interested:  FAQ: How To Repair Aluminum Siding On A House?

Is Hardie board waterproof?

HardieBacker® Cement Board with HydroDefense™ Technology is a long-lasting, waterproof solution for walls, floors, and countertops.

How much does it cost to reside a house with Hardie Plank?

Average cost: $1,200 – $9,000 Hardie board siding costs anywhere from $0.80 to $6.00 per square foot material installed on a home. If you were to replace an average size home with 1,500 square ft of materials you could expect to pay anywhere from $1,200 to $9,000 in replacement costs.

Why is LP siding bad?

LP’s Inner-Seal siding featured a 25-year warranty. However, in many cases, the siding rotted, disintegrated, and became discolored. Some plaintiffs alleged that the siding grew fungi. The product’s instability was readily apparent in the aftermath of South Florida’s devastating encounter with Hurricane Andrew in 1992.

Is LP or Hardie better?

Once the contractors believed in the product, the information was passed to the homeowners, including the following advantages: LP SmartSide has superior moisture protection and strength, longer lengths than Hardie (16′ over 12′), less weight than Hardie, and is less expensive to install (no special cutting tools


Leave a Reply

Your email address will not be published. Required fields are marked *