Often asked: How Much Hardie Plank Siding Do I Need?

Often asked: How Much Hardie Plank Siding Do I Need?

How many pieces of Hardie siding do I need per square?

Hardie Board siding dimensions

Board Size (width) Board Exposure Pisces / Square (100 sq. ft.)
5.25″ 4″ 25 pcs.
6.25″ 5″ 20 pcs.
7.25″ 6″ 17 pcs.
8.25″ 7″ 14 pcs.

How do you calculate Hardie?

To find the area of a triangle, multiply the height of the triangle by the length of the longest side, then divide by two. Once you know the area for each section, add all of the areas together to determine the total square footage of your home’s exterior.

How much should Hardie planks overlap?

Wherever Hardie siding meets a trim board, the company recommends you leave a 1/8” gap between the siding and the trim and apply a 3/8” bead of approved caulking to protect and seal the edge of the siding.

How do you calculate fiber cement siding?

In order to determine your fiber cement siding cost, you’ll need to determine how many panels you need to cover your house. Divide the total square footage for the house walls by 5.33. The answer will be the number of panels you’ll need. Allow another 10% for errors and problems.

You might be interested:  Question: What Is Under Outdoor Vinyl Siding?

Is James Hardie siding worth it?

James Hardie siding is a great, environmentally friendly choice for overall curb appeal and home value. It will give your home a new look and feel to it. It is an attractive choice with guaranteed durability and quality. It provides an amazing return on investment.

How much does it cost to side a 1500 sq ft house?

Aluminum siding costs An average 1,500 square foot house would cost around $7,700 for standard aluminum siding and upwards of $11,000 for custom grades after labor and material costs.

How much is a sheet of Hardie board?

The Cost. Hardie board siding runs about $0.70 to $5.25 per square foot.

How much Hardie siding is on a pallet?

There should be 252 pieces on a pallet.

What does Hardie plank weigh?

Hardieplank weighs 2.3 lbs per square foot. That is about the same weight as 5/8″ thick Sheetrock. Hardieplank is installed on load-bearing walls. It has been installed on over 8.5 million homes and the weight of the product has never been an issue.

Can you install Hardie plank directly to studs?

HardiePlank ® lap siding can be installed over braced wood or steel studs spaced a maximum of 24″ o.c. or directly to minimum 7/16″ thick OSB sheathing. See General Fastening Requirements.

Do you nail or screw Hardie board?

Fasten HardieBacker sheets with proper nails or screws (as listed in ”Materials Required” in the backer installation instructions) every 8” around the perimeter and all supporting studs. Keep fasteners between 3/8” and 3/4” from sheet edges and 2” in from sheet corners.

You might be interested:  FAQ: Youtube How To Install Vinyl Siding?

Do you need plywood under Hardie board siding?

Fiber cement siding should be installed over plywood, OSB, or sheathing. Be sure that the siding installed is dry. Otherwise, it might shrink at butt joints.

How often do you need to paint fiber cement siding?

If you purchase prefinished fiber cement siding, you don’t need to worry about painting it when it’s time to install. Unfinished styles on the other hand should be painted shortly after installation. For both types, a new paint job can be done every 10 to 15 years.

How much does it cost to have Hardie siding installed?

The average cost to install Hardie siding is $6 and $13 per square foot. Installing Hardiplank shingles on a 1,600 SF house costs $10,000 to $18,000 on average. James Hardie is the most well-known fiber cement siding brand due to its longevity, appearance, fire-resistance, and weather-resistance.


Leave a Reply

Your email address will not be published. Required fields are marked *