FAQ: Where To Buy Hardie Siding?

FAQ: Where To Buy Hardie Siding?

How much is a piece of Hardie siding?

Average cost: $1,200 – $9,000 Hardie board siding costs anywhere from $0.80 to $6.00 per square foot material installed on a home. If you were to replace an average size home with 1,500 square ft of materials you could expect to pay anywhere from $1,200 to $9,000 in replacement costs.

Can I install Hardie siding myself?

Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.

Does Home Depot sell Hardie board?

James Hardie HardiePlank HZ5 5/16 in. x 8.25 in. x 144 in. Fiber Cement Primed Cedarmill Lap Siding -615572 – The Home Depot.

How many pieces of Hardie siding are in a 8.25 pallet?

A classic look for THE HOME OF THEIR DREAMS. Prime Pcs./ Pallet 240 Pcs./Sq.

You might be interested:  Quick Answer: Where To Buy 12 Vertical Board Batten Aluminum Siding?

How much does it cost to side a 1500 square foot house?

Aluminum siding costs An average 1,500 square foot house would cost around $7,700 for standard aluminum siding and upwards of $11,000 for custom grades after labor and material costs.

Is Hardie board siding worth it?

James Hardie siding is a great, environmentally friendly choice for overall curb appeal and home value. It will give your home a new look and feel to it. It is an attractive choice with guaranteed durability and quality. It provides an amazing return on investment.

Can you install Hardie siding directly to studs?

HardiePlank® lap siding can be installed over braced wood or steel studs spaced a maximum of 24″ o.c. or directly to minimum 7/16″ thick OSB sheathing. See General Fastening Requirements.

Can you screw into Hardie board siding?

Can you screw James Hardie siding? If you mean “ can you put screws into James Hardie siding ” the answer is yes. Otherwise, you may have landed on the wrong website. James Hardie boards can technically be drilled like wood, but it is best to use a masonry bit to drill this tough fiber-cement board.

Do you nail or screw Hardie board?

Fasten HardieBacker sheets with proper nails or screws (as listed in ”Materials Required” in the backer installation instructions) every 8” around the perimeter and all supporting studs. Keep fasteners between 3/8” and 3/4” from sheet edges and 2” in from sheet corners.

Is Hardie board expensive?

The Cost. Hardie board siding runs about $0.70 to $5.25 per square foot. This could lead to a total cost of anywhere from $4,700 to $13,300.

You might be interested:  Readers ask: How To Cut Hardie Board Siding 4x8?

Does Lowes sell Hardie board?

James Hardie Backer Board at Lowes.com.

Does Hardie board need to be painted?

What is Hardie Plank? Hardie Plank is a newer composite material made of concrete substrate. Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance.

How do I calculate how much Hardie plank siding I need?

Estimate the number of linear feet of siding needed by multiplying the width of the wall in feet by the number of courses. Boards are most commonly sold in 12′ lengths, though 16′ and 20′ lengths can often be ordered. Divide the linear footage by 12′ to find the number of boards needed to cover the wall.

Does Lowes carry Hardie plank siding?

James Hardie Fiber Cement Siding at Lowes.com.

How long does Hardie plank siding last?

With the proper care, your James Hardie fiber cement siding will outlast its 30-year warranty. It can even last up to 50 years if cared for properly.


Leave a Reply

Your email address will not be published. Required fields are marked *